SL series of positive and negative pulsed electric car chargers

Practical Electronics Research Institute, Hangzhou Linping

Product Categories

Default Category

Friendly Links

home > Supply > SL series of positive and negative pulsed electric car chargers

SL series of positive and negative pulsed electric car chargers

Information Name:	SL series of positive and negative pulsed electric car chargers
Published:	2005-12-22
Validity:	360
Specifications:	Complete
Quantity:	0.00
Price Description:	Low
Detailed Product Description：	Most electric bikes use lead-acid battery as the current driving force, when the battery voltage discharge to cut-off after the recycling through the charger, battery experts Ono of Japan, said: "The battery is a bad charge, not with the bad", using ordinary charger charge, if the charging voltage is too low, the battery charge less power, the battery plates due to failure caused by sulfate; if the charging voltage is too high, charging the water in the electrolyte into hydrogen and oxygen by electrolysis, and hydrogen can not be reduced to water, so the battery will be invalidated because of water loss. Therefore, the charger will affect battery life. As noted in the latest research shows that the experts, because most of our current electric vehicle equipped with a charger, the charger are common, these chargers, the manufacturing technology is relatively backward, it can not determine the most effective regulatory charging process, so Even the so-called brand charger, as long as it stays in the regular charger or manufacturing technology, then it can not avoid the more or less the battery life will bring some of the damage. This is why the electric car will be extended battery life is short (six months to a year) the fundamental reason. "SL Series" Electric Bicycle NC pulse charger is unique is the use of high-frequency technology, micro-computer chip technology and alternating positive and negative pulse technology. Microcomputer chip technology is the battery in order to promptly collect feedback data, and data analysis, the charge state of transition, to ensure the accuracy of charge state transitions. With positive and negative pulse technology is to eliminate the time and charging the battery in the process of curing polarization, charge and discharge process through the stops, so that charge is always maintained at a relatively low polarization mode of operation, therefore, can increase the charge current to shorten the charging time, through the timely elimination of polarization, the battery charging process in the impedance decreases, the battery charging reception increased significantly, the battery can ensure a lower voltage at full power. High frequency technology, in order to charge and discharge the instant results in a rapid state transitions, the steep pulse front edge of the plates have been produced by lead sulfate crystallization before and after the steep edge of the impact pulse, resonance, so that large lead sulfate crystals become smaller, so that timely recovery plate active material. Therefore, using the model to charge, can be better to solve the charging voltage is too high plate sulfation and the phenomenon of electrolysis of water, but also to solve the battery charge current limit can not be too much to shorten the charging time, effectively extending the more than double the battery life. Tel :0571 -89186256 Mobile: 13735832200 Fax :0571 -86,244,047 Contact: Xia Xiaoyong Website: http://www.dze163.com

Admin>>>
You are the 5497 visitor
Copyright © GuangDong ICP No. 10089450, Practical Electronics Research Institute, Hangzhou Linping All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility